U-Blast Stencil

U-Blast Stencil Established in 2013, we are a trusted and proud carrier of U-Blast stencil – professionally manufactured products, each one meticulously tested.

Our primary objective is to provide high quality rubber stencil for the craftsman. Stencil that is not only flexible when needed, but also tough under pressure. Sandblasting or shot peening, we are dedicated in providing value through our products. We take pride in our pursuit for quality and take confidence in our process. We aim to make sure the rubber stencil is the last thing you have to worry about.

What's the most underrated tool in your shop?Everyone talks about compressors and blast cabinets.What's the one tool or ...
09/17/2026

What's the most underrated tool in your shop?

Everyone talks about compressors and blast cabinets.

What's the one tool or product you couldn't work without?

👇 Tell us below.

Clean, crisp lines don't happen by accident.The right stencil can make all the difference when it comes to achieving con...
09/15/2026

Clean, crisp lines don't happen by accident.

The right stencil can make all the difference when it comes to achieving consistent results. From adhesion and flexibility to thickness, choosing the right stencil for your material and application helps reduce rework and gives you greater confidence throughout the blasting process.

In our latest blog, we break down the three key factors to consider when selecting a sandblasting stencil and explain which U-Blast products are best suited for different applications.

👉 Read the full article to learn how to achieve cleaner, more consistent results on your next project.

https://www.ublaststencil.com/blog/how-to-get-clean-crisp-lines-with-the-right-stencil-for-sandblasting

09/11/2026

Consistent results start long before the sandblasting begins.

Every clean cut starts with a stencil that performs the way it's supposed to.

From smooth cutting to clear, accurate lines, every detail in the preparation process helps reduce rework and gives monument professionals greater confidence before the blasting even starts.

Because reliable results begin with reliable materials.

09/10/2026

What does it mean to stand behind your product?

In our latest Team Spotlight, Mandy Edwards shares why supporting customers is one of the most rewarding parts of working at U-Blast.

From answering product questions to making sure monument shops have what they need when they need it, Mandy explains why being there for customers is more than just good service. It's part of who we are.

We believe we're more than a stencil supplier. We're a partner committed to helping our customers succeed every step of the way.

Watch the full video on YouTube to meet Mandy and learn more about the people behind U-Blast: https://youtu.be/NAvODiRU-F0

Heading to Myrtle Beach this week?U-Blast will be attending the 2026 Monument Builders of the Carolinas conference from ...
09/08/2026

Heading to Myrtle Beach this week?

U-Blast will be attending the 2026 Monument Builders of the Carolinas conference from September 10–12 at the Embassy Suites Oceanfront Resort in Myrtle Beach, South Carolina.

These events are always a great opportunity to connect with monument professionals, hear what's happening in the industry, and have conversations about the challenges and opportunities shops are seeing every day.

If you're attending, we'd love to meet you. Stop by, say hello, and let's talk shop.

We look forward to seeing you in Myrtle Beach!

Natural stone isn't perfectly smooth.Rounded surfaces, long blast times, and fine detail work demand a stencil that perf...
09/03/2026

Natural stone isn't perfectly smooth.

Rounded surfaces, long blast times, and fine detail work demand a stencil that performs consistently from start to finish.

Jeremy at Adirondack Stone Works originally tried U-Blast looking for a more cost-effective solution. What kept him using it was the performance.

Our UB2 stencil is designed specifically for stone applications, combining stable adhesion, smooth cutting, and easy weeding to help maintain design integrity throughout the blasting process.

Because reliable products don't just improve results.

They help make every job a little easier.

Learn more about UB2: https://www.ublaststencil.com/blog/customer-spotlight-adirondack-stone-works

The cost of protecting a surface is small. The cost of damaging one isn't.Whether you're working on polished granite, ro...
09/01/2026

The cost of protecting a surface is small. The cost of damaging one isn't.

Whether you're working on polished granite, rough-cut stone, or intricate memorials, the right masking solution helps prevent costly mistakes and unnecessary rework.

U-Blast abrasion protection masks are designed to stay in place during demanding sandblasting applications while removing cleanly when the job is done, helping monument professionals achieve consistent results and protect the craftsmanship behind every project.

Ready to see the difference? Contact us today to request a free sample or place an order.

1-855-590-7070
https://ublaststencil.com/contact

08/28/2026

Getting inconsistent cut lines? Start with your machine settings.

If you're seeing cut line issues, the stencil isn't always the problem. In many cases, adjusting your blasting speed or pressure is all it takes to achieve cleaner, more consistent results.

Small adjustments can make a big difference.

"We know it's going to perform."That's the kind of confidence every monument shop wants in its materials.L+K Sandblastin...
08/27/2026

"We know it's going to perform."

That's the kind of confidence every monument shop wants in its materials.

L+K Sandblasting shares why they continue choosing U-Blast, from dependable service and fast communication to consistent stencil performance that helps keep production moving.

They also walk through their workflow, sharing practical tips on stencil storage, application techniques, the reverse roll method, and how they troubleshoot cut line issues during blasting.

One key takeaway? Cut line issues are often the result of machine settings, not the stencil itself. Reliable materials help eliminate one more variable from the process.

Watch the full video on YouTube to hear why L+K continues to trust U-Blast: https://youtu.be/zdDvVenHDrU

If you could improve one part of your sandblasting process, what would it be?A.) Faster setupB.) Cleaner cutsC.) Less cl...
08/25/2026

If you could improve one part of your sandblasting process, what would it be?

A.) Faster setup
B.) Cleaner cuts
C.) Less cleanup
D.) Longer stencil life

Drop your answer in the comments 👇

Address

1037 Old Middleton Road
Elberton, GA
30635

Opening Hours

Monday 10am - 4pm
Tuesday 10am - 4pm
Wednesday 10am - 4pm
Thursday 10am - 4pm
Friday 10am - 3pm

Telephone

+17062832289

Website

Alerts

Be the first to know and let us send you an email when U-Blast Stencil posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share