WKTOOLS.com

None

04/10/2022

Millers Falls Hand Drill No 2 -1920. Two Cocobolo Handles!

Rare tropical wood; malleable iron, black enameled frame; large gear painted red; other metal parts nickeled.

http://www.wktools.com/t_MF-hDrills/220-No2-1920-01/220-No2-1920-01.asp

Hollow End Handle, with screw cap, shaped so tool may be used as a breast drill, and spare bits. Removable side grip handle. Cut Gears with adjustable friction roll to equalize bearing. Pinion of Steel, Ball Thrust Bearing. Reinforced spindle housing.

11/19/2019

Recently I delivered a Yankee brace, 8" sweep, to a customer. He is actually here, on Facebook. After receiving the brace he sent me this message:

The brace is perfect!
Really unbelievable!
The workmanship is flawless.
Thank you so much!

10/23/2019

Millers Falls Hand Drill No 2 -1929. All Cocobolo Handles!

http://www.wktools.com/t_MF-hDrills/229-No2-1929-06/229-No2-1929-06.asp

06/12/2019

Chuck for Millers Falls Hand Drill No. 2

http://www.wktools.com/t_MiscParts/Chuck-04/Chuck-04.asp

Replacement Chuck for Millers Falls Hand Drill No. 2.

This chuck is based on Ryther's patent and was designed to be used on drills produced between 1938 and 1957.

05/18/2019

Millers Falls Hand Drill No. 2A with Tigerwood Handle - 1960s

http://www.wktools.com/t_MF-hDrills/257-No2A-1957-1960s-02/257-No2A-1957-1960s-02.asp

This release went into production in 1957. Millers Falls catalog describes this drill as:

Single speed hand drill with two pinions. Die-cast, iron frame is enameled black. The drive gear is painted red. Tropical hardwood main handle with hollow storage for drill bits and cap. "Chef's cap" side handle.

Ball thrust bearing on the spindle. Three-jaw, spring chuck adjustable from 0 to 3/8 inch. Bright parts nickel plated.

This specific specimen was most likely produced during the second part of the 1960s.

05/16/2019

For Sale: Millers Falls Hand Drill No. 5 - 1917 edition. Cocobolo handle.

http://www.wktools.com/t_MF-hDrills/517-No5-1917-PO/517-No5-1917.asp

Frame made of malleable iron. Drive gear with extra wide rim. Two pinions, with drive pinions supported by ball thrust bearing at the end of the spindle. Three-jaw, spring-less chuck adjustable 0 to 3/16 inch. Black enameled frame, drive gear painted red; bright parts nickel plated.

05/09/2019

FOR SALE: Chuck for Millers Falls Hand Drill No. 2

http://www.wktools.com/t_MiscParts/Chuck-02/Chuck-02.asp

Replacement Chuck for Millers Falls Hand Drill No. 2.

This chuck was designed to be used on drills produced between 1938 and 1957. Below is an image of a spindle with dimensions for which this chuck is suitable.
This chuck is fully functional but has a few scarrings on the shell.

05/05/2019

Goodell-Pratt Hand Drill No 5.5 with Tigerwood Handle – c. 1938

http://www.wktools.com/t_GP-HandDrills/555-GPno5.5-1938-02/555-GPno5.5-1938-02.asp

After the merger with Millers Falls Co., Goodell-Pratt hand drill No. 5.5 received some overhaul but was still sold with Goodell-Pratt markings and under original numbering convention. The catalog No. 42, which offered goods made by Millers Falls Co. and former Goodell-Pratt Co. described this drill as follows:

Known the world over for its smooth operation, years of serviceability and fine finish. Two speeds with ratios of 3.8 to 1 and 1.3 to 1, changed by turning the shift k**b. Ball bearing spindle. Steel pinions.

05/02/2019

"Yankee" 2100/2101 Bit Brace -12" sweep - North Bros. Mfg. - Restored.

North Bros. Mfg. Co. catalog:
The finest bit brace ever made. Holds any shape bit ( round, square, any taper) in a vise-like grip. The ratchet works without calling for a hand to hold chuck from turning back. Does every kind of boring job within the scope of a bit brace.

http://www.wktools.com/t_Yankee-BB/2101-12-NBM-001/2101-12-NBM-001-1.asp

04/19/2019

http://www.wktools.com/t_MiscParts/k**b-Mushr/MF_k**b-Mushr-2.asp

Millers Falls Hand Drill Side Handle known as a "Mushroom".
This handle is made as a replacement for missing k**bs on many MF No. 1, No. 2, No. 3, No. 5 other Millers Falls hand drills produced between 1907 and 1935.
Turned in hardwood and finished in Red Mahogany Poly. Brass ferrule.
Limited Quantities Available

http://www.wktools.com/t_MiscParts/k**b-Mushr/MF_k**b-Mushr-2.asp

Address

Albuquerque, NM

Website

http://www.wkTools.com/

Alerts

Be the first to know and let us send you an email when WKTOOLS.com posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to WKTOOLS.com:

Shortcuts

Want your business to be the top-listed Event/venue in Albuquerque?