Keybro Keybro is dedicated to provide quality service for the keeb community. Night-day difference guarantee

13/07/2025

I’m going to be out of service for a while, I’ll be living in Japan for a few years. Feel free to message if you have any keeb-related questions!

Thank you so much for everyone who availed my service during my college days especially for making my pandemic years busy!

I appreciate you all.

Quick soldering work, thanks a lot dude! This is our client's minimalist set up!Will try to dig up some previous keebs 😁
27/06/2025

Quick soldering work, thanks a lot dude! This is our client's minimalist set up!

Will try to dig up some previous keebs 😁

Same client, same owner, same brother 🫑Model O 2 Wireless replaced left&right w/ BSWD!! 2 mouse was sent to me and both ...
12/06/2024

Same client, same owner, same brother 🫑

Model O 2 Wireless replaced left&right w/ BSWD!!

2 mouse was sent to me and both was done on a different session, the other was the repaint one πŸ˜„

yuhzirr

Did my 1st ever spray paint job as I was persuaded by my suki client, reason being I'm the only one allowed to touch his...
12/06/2024

Did my 1st ever spray paint job as I was persuaded by my suki client, reason being I'm the only one allowed to touch his mouse n keebs πŸ˜†

White to Maroon Matte, I could definitely improve a lot more!

Also replaced left&right w/ kailh 8.0, scroll wheel encoder, and Tiger ice skates

It's really been a while since I posted, maybe I'll post some works i've done these past 2 years slowly πŸ₯²

Also! A lot of my previous works/photos is gone as one of my hard drive got corrupted and all my list got deleted and my camera is ded πŸ₯² Expect low quality pics as phone nalang gamit ko for pics, I know y'all would understand 🀞🏼

26/10/2022

hahaha lakas mo brodie! next time ulit 🀣

glad to meet u too my brodie πŸ₯Έ
22/10/2022

glad to meet u too my brodie πŸ₯Έ

kitakits mga brotheroskie
21/10/2022

kitakits mga brotheroskie

Client Build: Keychron K10⌨️: Hope ✨  -Desoldered Gateron red switches  -Mill-max (non-hotswap to hotswap conversion)It'...
13/09/2022

Client Build: Keychron K10
⌨️: Hope ✨

-Desoldered Gateron red switches

-Mill-max (non-hotswap to hotswap conversion)

It's been a while that I had mill-maxed a full board! Really took me some time to disassemble the board, may hidden screws pa kasi 😑🀣 Keychron u gotta fix K10 disassembly guide my g! Really HOPE everybody is doing well 😁

For any inquiries please check our page!

Client Build: Anne Pro 2⌨️: Samantha  -Desoldered Gateron blue switches  -Mill-max (non-hotswap to hotswap conversion)  ...
26/08/2022

Client Build: Anne Pro 2
⌨️: Samantha

-Desoldered Gateron blue switches

-Mill-max (non-hotswap to hotswap conversion)

-Tempest mod

-EVA Foam mod

Another one, another one, and another one! Welcome to the AP2 hotswap gang! 😎 AP2 will always be the best pre-built 60% when converted to hotswap because of its overall functionality! It's been a while bois, college is meh 😢

For any inquiries please check our page!

Proud of this guy! Congrats on winning Alliance Games Finals last July 24 on the CONQuest Festival! GG VA Vintage of Vir...
02/08/2022

Proud of this guy! Congrats on winning Alliance Games Finals last July 24 on the CONQuest Festival! GG VA Vintage of Viridus Arcus of DLSU!

Client mod: GMMK Pro
⌨: Arvin

-Glorious Pandas lubed w/ Krytox 205g0 and filmed w/ 0.15mm Redux Film

-Durock v2 stabs holee modded, lubed with krytox 205g0 and applied w/ synthetic grease

-Tempest Mod

Such an honor to be able to work on this board! A champion-winning board that was literally modded the day before his big finals! 😁 Trivia: Keybro is an immo player 🀫

For any inquiries please check our page!

Client mod: Akko World Tour-Tokyo R2 3096⌨: Marcelino   -Desoldered the switches and soldered them back after the mods  ...
10/07/2022

Client mod: Akko World Tour-Tokyo R2 3096
⌨: Marcelino

-Desoldered the switches and soldered them back after the mods

-LED mod (3mm white LEDs)

-Akko pink switches lubed w/ Krytox 205g0 and filmed w/ Redux films

-Durock plate-mount stabs holee modded, lubed with krytox 205g0 and applied w/ synthetic grease

-PE foam mod

-Tempest mod

One of the most time consuming work that I've done since that full razer mod last year (if anyone remembers πŸ˜‰). took me some time to install all the LEDs and solder 'em, and then cut the extras since the pins are looooong 🀣 Note that this pre-built board didn't have LEDs installed, I had to buy 3mm ones!

For any inquiries please check our page!

Address

#31 Pres Emilio Aguinaldo Street
Marikina City
4102

Telephone

+639951069920

Website

Alerts

Be the first to know and let us send you an email when Keybro posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share