Omegaqms

Omegaqms India’s largest conformity assessment service provider for ISI (BIS), CRS, ETA (WPC), BEE, NABL, TEC, ISO, etc., serving for more than 2 decades

ER-01 compliance has become a critical cybersecurity requirement for CCTV cameras intended for deployment in India. Mand...
16/06/2026

ER-01 compliance has become a critical cybersecurity requirement for CCTV cameras intended for deployment in India. Mandated under the security framework administered through MeitY and STQC, ER-01 certification is designed to strengthen cybersecurity controls, mitigate vulnerabilities, and ensure that surveillance devices meet established security standards before entering the Indian market.

To achieve ER-01 compliance, manufacturers are required to undergo cybersecurity gap assessment, comprehensive technical documentation review, security testing through authorized laboratories, and conformity verification against the prescribed ER-01 requirements. The certification process evaluates device security, software integrity, access controls, vulnerability management, and overall cybersecurity preparedness before approval can be granted.

Omega QMS provides end-to-end ER-01 compliance support for CCTV camera manufacturers, including gap assessment, documentation preparation, coordination with STQC-approved laboratories, and complete certification management throughout the compliance journey.

Get in touch with us:

Email: [email protected]
Phone: +91-11-41413939 (100 Lines)
Website: www.globalomega.com

The scope of the regulation includes electric coffee makers, electric coffee mills, and appliances used for heating liqu...
16/06/2026

The scope of the regulation includes electric coffee makers, electric coffee mills, and appliances used for heating liquids that form part of coffee-making equipment.

Compliance requires testing as per IS 302 (Part 1) at a BIS-recognised laboratory.

Compliance will become mandatory from 1 October 2026 for general enterprises (other than micro and small enterprises), from 1 January 2027 for small enterprises, and from 1 April 2027 for micro enterprises.

The order also provides limited exemptions for export-only production, eligible R&D imports of up to 200 units per year, and certain declared existing stock, subject to applicable conditions.

For expert end-to-end guidance through the certification process, contact Omega Qms:

Email: [email protected]
Phone: +91-11 41413939 (100 Lines)
Website: www.globalomega.com

The BIS certification process for seamless steel gas cylinders is one of the most technically demanding compliance journ...
15/06/2026

The BIS certification process for seamless steel gas cylinders is one of the most technically demanding compliance journeys in the pressure equipment sector. Manufacturers must demonstrate conformity with stringent safety, quality, and performance requirements before products can be approved for the Indian market.

To obtain BIS certification, manufacturers are required to undergo detailed factory audits, pressure and safety testing, technical documentation review, and specialized laboratory evaluations in accordance with applicable Indian Standards. The certification process involves coordination across multiple stakeholders and rigorous verification of manufacturing controls to ensure consistent product quality and safety.

Omega QMS provides end-to-end BIS certification support for seamless steel gas cylinders, helping manufacturers navigate complex regulatory requirements with confidence.

Get in touch with us:

Email: [email protected]
Phone: +91-11-41413939 (100 Lines)
Website: www.globalomega.com

Massage appliances are now within the scope of QCO 2026, making BIS certification a mandatory requirement for manufactur...
15/06/2026

Massage appliances are now within the scope of QCO 2026, making BIS certification a mandatory requirement for manufacturers and importers operating in the Indian market.

The regulation applies to both massage appliances and DC-supplied/battery-operated massage appliances. Before sale or import, products must obtain a BIS Scheme-I licence, undergo testing as per IS 302 (Part 1) at a BIS-recognised laboratory, complete BIS factory inspections, and carry the ISI mark.

At Omega QMS, we provide comprehensive support for BIS certification.

The QCO has already been notified. Early compliance planning can help businesses avoid delays in market access.

Contact us at:
Email: [email protected]
Phone: +91-11 41413939 (100 Lines)
Website: www.globalomega.com

The Air Conditioner QCO Amendment Order, 2026 introduces important compliance updates for manufacturers, importers, and ...
13/06/2026

The Air Conditioner QCO Amendment Order, 2026 introduces important compliance updates for manufacturers, importers, and component suppliers operating in the air conditioning sector. The amendment expands regulatory obligations across key product categories and reinforces BIS certification requirements for products covered under the notified Quality Control Order framework.

To comply with the amended requirements, air conditioner manufacturers, hermetic compressor manufacturers, and temperature sensing control makers must review the revised product coverage, applicable Indian Standards, and certification obligations. Non-compliant products may face import restrictions, market withdrawal, and regulatory enforcement actions. Businesses should assess their compliance status immediately to ensure uninterrupted market access.

Omega QMS is actively monitoring this regulatory development and provides end-to-end BIS compliance support to help manufacturers understand and implement the new requirements efficiently.

Get in touch with us:

Email: [email protected]
Phone: +91-11-41413939 (100 Lines)
Website: www.globalomega.com

Not all products covered under the Electrical Appliances QCO 2026 are conventional household appliances. Outdoor barbecu...
13/06/2026

Not all products covered under the Electrical Appliances QCO 2026 are conventional household appliances. Outdoor barbecues are also included and require mandatory BIS certification under the applicable standards.

If you're a manufacturer or importer of outdoor electrical barbecue, now is the time to review your compliance obligations and prepare ahead of the implementation deadlines.

At Omega QMS, we provide expert guidance on BIS certification and regulatory compliance.

Email: [email protected]
Phone: 011-4141-3939 (100 Lines)
Website: www.globalomega.com

When a QCO threatened to disrupt critical water meter imports into India, businesses across the sector faced significant...
12/06/2026

When a QCO threatened to disrupt critical water meter imports into India, businesses across the sector faced significant operational uncertainty.

To address the challenge, detailed technical representations were submitted to DPIIT, industry stakeholders were brought together, comprehensive economic impact assessments were presented, and complex inter-ministerial processes were navigated to highlight the broader implications for infrastructure projects.

These coordinated efforts resulted in a temporary exemption for water meter imports, helping protect businesses and ensuring that essential water infrastructure projects across India continued without disruption.

This is what policy expertise, regulatory understanding, and industry advocacy look like in action.

Omega QMS continues to support manufacturers, importers, and industry stakeholders with strategic regulatory compliance and BIS certification solutions.

Get in touch with us:

Email: [email protected]
Phone: +91-11-41413939 (100 Lines)
Website: www.globalomega.com

Laundry & Fabric Care Appliances Now Covered Under BIS Certification RequirementsUnder the Electrical Appliances QCO 202...
12/06/2026

Laundry & Fabric Care Appliances Now Covered Under BIS Certification Requirements

Under the Electrical Appliances QCO 2026, BIS certification will be mandatory for several laundry and fabric care products, including spin extractors, tumbler dryers, clothes dryers, towel rails, fabric steamers, and electric heating tools used in garment care applications.

These appliances are required to comply with IS 302 (Part 1) and obtain a BIS licence under Scheme-I

Omega QMS Pvt. Ltd. provides end-to-end support for BIS certification, QCO applicability assessments, testing coordination, AIR services, and import compliance requirements.

Contact Us:
Omega QMS Pvt. Ltd.
+91-11-41413939 (100 Lines)
[email protected]

The implementation of Furniture QCO requirements brought significant compliance challenges for the industry. Through act...
11/06/2026

The implementation of Furniture QCO requirements brought significant compliance challenges for the industry. Through active engagement with the Ministry of Commerce, industry representations, and continuous advocacy efforts, critical timeline extensions were secured to support manufacturers in achieving BIS compliance.

Today, hundreds of furniture businesses are better prepared to navigate regulatory requirements with greater clarity and confidence.

Omega QMS continues to provide end-to-end BIS certification and compliance support for furniture manufacturers across India.

Get in touch with us:

📧 Email: [email protected]
📞 Phone: +91-11-41413939 (100 Lines)
🌐 Website: www.globalomega.com

BIS Certification for Beauty & Wellness Appliances under QCO 2026The Electrical Appliances (Quality Control) Order, 2026...
10/06/2026

BIS Certification for Beauty & Wellness Appliances under QCO 2026

The Electrical Appliances (Quality Control) Order, 2026 brings a range of beauty and wellness appliances under mandatory BIS certification requirements. Covered products include sauna heating appliances, infrared cabins, skin beauty care appliances, whirlpool baths and spas, appliances for skin exposure to optical radiation, and beauty care devices incorporating lasers and intense light sources.

These products must comply with IS 302 (Part 1) and obtain a BIS licence under Scheme-I before sale or import into India.

Key compliance deadlines:
• General Enterprises – 1 October 2026
• Small Enterprises – 1 January 2027
• Micro Enterprises – 1 April 2027

Omega QMS Pvt. Ltd. supports businesses with end to end BIS certification assistance.

Contact us at:
Email: [email protected]
Phone: +91-11 41413939 (100 Lines)
Website: www.globalomega.com

Address

908-909, Hemkunt House, Rajendra Place
Delhi
110008

Opening Hours

Monday 9:30am - 6:30pm
Tuesday 9:30am - 6:30pm
Wednesday 9:30am - 6:30pm
Thursday 9:30am - 6:30pm
Friday 9:30am - 6:30pm
Saturday 9:30am - 6:30pm

Telephone

+919810541740

Website

Alerts

Be the first to know and let us send you an email when Omegaqms posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Omegaqms:

Shortcuts

Share