Waterguard Services Ltd

29/05/2026

A wet ceiling is a warning—act fast to limit damage.

𝗤𝘂𝗲𝘀𝘁𝗶𝗼𝗻: 𝗪𝗵𝗼 𝗱𝗼 𝗜 𝗰𝗮𝗹𝗹 𝗳𝗼𝗿 𝘄𝗮𝘁𝗲𝗿 𝗱𝗮𝗺𝗮𝗴𝗲 𝗶𝗻 𝘁𝗵𝗲 𝗰𝗲𝗶𝗹𝗶𝗻𝗴?

Answer: First, stop the water at the stopcock (or isolate the supply if you can). Then call a qualified plumber to find and fix the source. If it’s significant, contact your insurer and (where relevant) a property manager/maintenance team. Waterguard systems help by detecting leaks early and, with shut-off, reducing how much water escapes in the first place.

Want better protection before the next leak? Explore Waterguard solutions or contact us: https://bit.ly/4eTjCk1

28/05/2026

𝗔 𝘀𝗹𝗼𝘄 𝗹𝗲𝗮𝗸 𝘁𝗼𝗱𝗮𝘆 — 𝗵𝗶𝗱𝗱𝗲𝗻 𝗱𝗮𝗺𝗮𝗴𝗲 𝘁𝗼𝗺𝗼𝗿𝗿𝗼𝘄. 𝗜𝘀 𝘆𝗼𝘂𝗿 𝗵𝗼𝗺𝗲 𝗽𝗿𝗼𝘁𝗲𝗰𝘁𝗲𝗱?

Many leaks begin quietly — a drip under the sink, a loose valve behind a boiler, a silent leak behind walls. By the time visible damage appears, it’s often costly and invasive.

In our guide, we explore how different Waterguard systems detect leaks early, shut off water automatically, and give homeowners peace of mind. Discover the best leak detector for your home’s size and plumbing complexity.

🔗 Read now: https://www.waterguard.co.uk/blog/the-best-leak-detector-for-your-home/

27/05/2026

𝗡𝗼𝘁 𝗮𝗹𝗹 𝘀𝗵𝘂𝘁-𝗼𝗳𝗳 𝘃𝗮𝗹𝘃𝗲𝘀 𝗮𝗿𝗲 𝗰𝗿𝗲𝗮𝘁𝗲𝗱 𝗲𝗾𝘂𝗮𝗹.

Solenoid valves are a key component of any water leak detection system — but specifying the wrong type can compromise performance, reliability and compliance.

Our latest guide covers:
• How solenoid valves work
• Normally-open vs normally-closed valves
• Power-fail behaviour
• Why valve selection matters for mixed-use and residential buildings

Designed for engineers, consultants and contractors.

🔗 Read more:
https://www.waterguard.co.uk/blog/solenoid-valves-water-leak-detection/

How do Waterguard solenoid valves stand out from the rest? From energy efficiency to crucial functions and failsafe performance.

26/05/2026

You can now buy Waterguard Home, Solo, Flow 7, and PIR systems directly from our website.
Order in minutes, get faster fulfilment, and secure advanced water leak protection for your property — without the back-and-forth.

Shop online: https://www.waterguard.co.uk/products/

Waterguard design, manufacture and supply a range of water leak detection systems. Providing a solution for any type of building and water usage requirements,

25/05/2026

Tape, cable, or probe feet? Floor leak detection isn’t one-size-fits-all — the best setups mix sensing types by zone.

This guide explains what each does best, where to install them, and how they connect into a wider leak detection strategy.

Read: https://www.waterguard.co.uk/blog/floor-water-leak-detection-puddle/

Floor leak detection explained: how probe sensors, tape and cable spot water early under floors, around plant and pipe runs—plus Waterguard Puddle UK.

22/05/2026

The leak is bad enough—the bill shouldn’t be a surprise too.

𝗤𝘂𝗲𝘀𝘁𝗶𝗼𝗻: 𝗪𝗵𝗼 𝗽𝗮𝘆𝘀 𝗳𝗼𝗿 𝘄𝗮𝘁𝗲𝗿 𝗹𝗲𝗮𝗸𝘀?

Answer: It depends where the leak starts and what’s affected. In homes and buildings, responsibility is often linked to ownership and the source of the leak (e.g., your pipework vs a neighbour’s). Insurance may help, but excesses and exclusions can apply. That’s why early detection and shut-off matter—less damage, fewer disputes, lower costs.

Want to reduce escape-of-water risk on your next project or property? Contact us: https://bit.ly/4eTjCk1

21/05/2026

Did you know? 🌟 In addition to designing and manufacturing all of our water leak detection systems, we offer comprehensive site services! From installation and maintenance to site surveys and commissioning, we've got you covered. 🛠️🔧 Let us handle the details so you can focus on what matters most.

Learn more on our website https://www.waterguard.co.uk/service-centre/

20/05/2026

Managing rented properties means thinking beyond today’s maintenance issue and looking at preventable risks too.

Waterguard Solo is ideal for rented and multiple occupancy accommodation, with automatic shut-off based on water flow duration and timer reset each time the water stops. That makes it a practical option for many residential rental settings.

👉 See if Solo suits your rental property or portfolio: https://www.waterguard.co.uk/products/domestic/solo/

19/05/2026

If you’re working to BREEAM targets, automatic shut-off in wet areas is a practical requirement — not a nice-to-have.

PIR Water Isolation is designed to meet BREEAM Wat 04 automatic shut-off requirements, and can also support Wat 03 when used alongside Series 7 on projects that need wider monitoring.

It’s a clean way to add occupancy-based control where it matters most.

👉 View the compliance notes and product details: https://www.waterguard.co.uk/products/commercial/passive-infra-red-pir/

18/05/2026

When leak detection is part of the specification, the right support matters just as much as the right product.

In this case study, Damson Mechanical shares how they worked with Waterguard Series 7 to meet BREEAM leak detection requirements — with competitive supply, straightforward installation, and commissioning support to help their team get up and running.

Read the case study: https://www.waterguard.co.uk/projects/working-with-damson/