Wie sind die Öffnungszeiten?

Montag 08:00 - 17:00 Dienstag 08:00 - 17:00 Mittwoch 08:00 - 17:00 Donnerstag 08:00 - 17:00 Freitag 08:00 - 17:00

BINDER

Name: BINDER
Address: Im Mittleren Ösch 5, Tuttlingen, 78532, DE
Telephone: +49746220050
Price range: $$

Anrufen Wegbeschreibung Website

The world's largest specialist in simulation chambers for the scientific and industrial laboratory. www.binder-world.com

To us, our brand is characterized by its mature advanced technologies, pioneering innovative spirit and obsession with absolute precision.

29/10/2026

🧊 𝗔 𝟮𝟮𝟬 °𝗖 𝘁𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲 𝗱𝗿𝗼𝗽 𝗶𝗻 𝟲𝟬 𝗺𝗶𝗻𝘂𝘁𝗲𝘀. 🔥

The BINDER MKF 720 CO₂ cools from +180 °C to −40 °C in only one hour.

For labs running repeated temperature tests, the transitions between setpoints matter. Each cooling phase takes up part of the schedule before the next stage can begin. ⌛

A short transition helps keep the test sequence moving.

The 60-minute figure describes the chamber’s cooling time for this specified interval. How quickly a specimen reaches its target temperature also depends on its mass, heat output and test setup.

When planning cyclic tests, include cooling transitions alongside target temperatures and dwell times. They can have a substantial effect on the overall schedule.

27/10/2026

𝗗𝗶𝗱 𝘆𝗼𝘂 𝗸𝗻𝗼𝘄? 𝗜𝗻 𝗮 𝗖𝗢₂ 𝗶𝗻𝗰𝘂𝗯𝗮𝘁𝗼𝗿, 𝗹𝗶𝗴𝗵𝘁 𝗺𝗮𝗸𝗲𝘀 𝘁𝗵𝗲 𝗮𝘁𝗺𝗼𝘀𝗽𝗵𝗲𝗿𝗲 𝗺𝗲𝗮𝘀𝘂𝗿𝗮𝗯𝗹𝗲 🔬

The CO₂ sensor is one of the most important technical components of an incubator. It continuously monitors whether the atmosphere inside the chamber matches the setpoint. To do this responsively and without interference, it uses infrared light.

CO₂ absorbs specific wavelengths of this light. The strength of this absorption can be used to determine how much CO₂ is present in the atmosphere. This makes an invisible gas precisely measurable.

This measurement is crucial for control. Through the bicarbonate buffer system, the CO₂ level influences the pH value of the culture medium. The sensor therefore measures the atmosphere, while also indirectly helping to keep the cells’ chemical environment stable.

Particularly precise systems, such as our BINDER CO₂ incubators, also work with reference measurements. This helps compensate for effects such as ageing, optical changes or minor sources of interference.

The sensor measures gas. But its real task goes further: it helps keep the cells’ living conditions constant.

15/10/2026

💧𝗔 𝘁𝗲𝘀𝘁 𝗰𝗵𝗮𝗺𝗯𝗲𝗿 𝘀𝗵𝗼𝘂𝗹𝗱 𝗳𝗶𝘁 𝘁𝗵𝗲 𝘀𝗽𝗲𝗰𝗶𝗺𝗲𝗻 𝗮𝗻𝗱 𝘁𝗵𝗲 𝘀𝗽𝗮𝗰𝗲 𝗮𝘃𝗮𝗶𝗹𝗮𝗯𝗹𝗲 𝗶𝗻 𝘁𝗵𝗲 𝗹𝗮𝗯. 🔥

With the latest expansion of our MK CO₂ and MKF CO₂ ranges, both series are available in four sizes: 240, 400, 720 and 1020.

That gives testing teams more choice, whether they are working with individual components or larger assemblies.

MK CO₂ is designed for rapid, programmable temperature changes. MKF CO₂ adds humidity control for tests that require defined temperature and humidity conditions.

❄️ Both series use CO₂ (R744) as the refrigerant and come with extensive standard equipment.

🌐 Compare the sizes and find the right chamber for your test setup: https://lnkd.in/egN4eYAF

Hashtag Hashtag Hashtag

14/10/2026

𝗪𝗼𝗿𝗹𝗱 𝗦𝘁𝗮𝗻𝗱𝗮𝗿𝗱𝘀 𝗗𝗮𝘆 𝗶𝘀 𝗮 𝗴𝗼𝗼𝗱 𝗿𝗲𝗺𝗶𝗻𝗱𝗲𝗿 𝘁𝗵𝗮𝘁 𝗿𝗲𝗹𝗶𝗮𝗯𝗹𝗲 𝗿𝗲𝘀𝘂𝗹𝘁𝘀 𝗼𝗳𝘁𝗲𝗻 𝘀𝘁𝗮𝗿𝘁 𝗹𝗼𝗻𝗴 𝗯𝗲𝗳𝗼𝗿𝗲 𝗮 𝗽𝗿𝗼𝗱𝘂𝗰𝘁 𝗿𝗲𝗮𝗰𝗵𝗲𝘀 𝘁𝗵𝗲 𝗹𝗮𝗯.

At BINDER, defined processes are part of our daily work. Our management systems are certified according to ISO 9001 for quality management, ISO 14001 for environmental management and ISO 50001 for energy management.

ISO 9001 provides the framework for our quality management. This includes standardized procedures for areas such as calibration, adjustment and the monitoring of test equipment. BINDER’s quality management system has been certified since 1996.

ISO 14001 and ISO 50001 address two further areas that are relevant to how we operate: reducing environmental impacts and systematically improving energy performance. Both management systems have been certified at BINDER since 2022.

These certificates are renewed through regular audits. The work behind them, however, happens every day: in established processes, documented responsibilities and the continuous review of how we can improve.

On World Standards Day, we would therefore like to recognize the colleagues who make these requirements part of everyday practice.

Hashtag Hashtag Hashtag Hashtag Hashtag Hashtag Hashtag Hashtag

06/10/2026

𝗗𝗶𝗱 𝘆𝗼𝘂 𝗸𝗻𝗼𝘄? 💡

Over the years, BINDER GmbH’s engineering work has resulted in 217 registered patents and utility models, 111 of which are currently active. 📐

At BINDER GmbH, engineering means questioning existing solutions, solving complex technical challenges and continuously improving the conditions our customers rely on every day.

Our patents and utility models cover a broad range of fields, including Thermal Management and Refrigeration, Air, Humidity and Gas Management, and Enclosure, Insulation and Thermal Architecture. ⚙️

BINDER’s inventive history goes back several decades. First solutions were already patented in the 1970s and 1980s. Further developments followed in the 1990s, including tilt-proof racks with bead guides, APT.line – Advanced Preheating Technology, the thermally decoupled interior door and vacuum expansion racks. Some of these ideas continue to influence our products today.

Every patent and utility model starts with a technical challenge, an idea and the expertise to develop it further. Turning a first sketch into a reliable solution takes many people, many iterations and a great deal of engineering work.

A big thank you to our R&D and engineering team for the ideas, expertise and persistence behind these developments. 👏🏽

29/09/2026

𝗪𝗵𝗶𝗰𝗵 𝗕𝗜𝗡𝗗𝗘𝗥 𝗖𝗢₂ 𝗶𝗻𝗰𝘂𝗯𝗮𝘁𝗼𝗿 𝗶𝘀 𝘁𝗵𝗲 𝗿𝗶𝗴𝗵𝘁 𝗳𝗶𝘁 𝗳𝗼𝗿 𝘆𝗼𝘂𝗿 𝗰𝗲𝗹𝗹 𝗰𝘂𝗹𝘁𝘂𝗿𝗲 𝗮𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻? 🧫

The answer depends on the requirements of your process. Contamination protection, CO₂ stability, humidity control, O₂ regulation and documentation can all play an important role.

Our CB-S, CB and CBF series are designed for different levels of application complexity:

𝗖𝗕-𝗦 is the choice for routine cell cultivation and cell production.
𝗖𝗕 offers additional flexibility for research, cell-based assays and changing processes.
𝗖𝗕𝗙 is designed for sensitive applications such as cell and gene therapy and GMP environments, with active humidification and extended process control.

The comparison in our graphic shows the key differences between the three series at a glance, from sterilization and sensor technology to O₂ control and humidity management.

🌐 Find more information here: https://lnkd.in/duZGn5Y6

25/09/2026

𝗪𝗼𝗧𝗦 𝟮𝟬𝟮𝟲 𝗶𝗻 𝗨𝘁𝗿𝗲𝗰𝗵𝘁! 🌱

You can find us until today, Friday at the BINDER GmbH booth at World of Industry, Technology & Science (WoTS) in Utrecht.

There, we are presenting selected solutions for cell culture and plant growth applications, including our CB-S and CB CO₂ incubators as well as the KB PRO 470 plant growth chamber with CO₂ module.

If you are working with cell cultures, our team can also walk you through the differences between the CB-S, CB and CBF series and discuss which features are relevant for your specific application, from contamination protection and CO₂ stability to O₂ control and humidity management.

On site for BINDER are Cor Koster, Market Development Manager, and Fabienne Schmidtjansen, Channel Sales Coordinator.

Stop by, take a closer look at the products and talk to us about your application.

BINDER at WoTS 2026

📍 Jaarbeurs Utrecht, Netherlands
📅 September 22–25, 2026
📌 Hall 10 | Booth A025

22/09/2026

𝗙𝗿𝗼𝗺 𝗮 𝗖𝗢₂ 𝗶𝗻𝗰𝘂𝗯𝗮𝘁𝗼𝗿 𝘁𝗼 𝘇𝗲𝗿𝗼 𝗴𝗿𝗮𝘃𝗶𝘁𝘆 – 𝗮𝗻𝗱 𝘁𝗵𝗲𝗻 𝘄𝗵𝗮𝘁? 🚀

A few years ago, we shared the story of a research team at Lucerne University of Applied Sciences and Arts investigating how cartilage cells respond to changing gravitational forces. 🌌

The preparation started on the ground. Primary cartilage cells were cultivated under controlled conditions using a BINDER CO₂ incubator before being taken to Bordeaux for an ESA parabolic flight campaign.

During 31 parabolas, the researchers exposed the cells to alternating phases of hypergravity and microgravity.

But what happened after the flight? 🛫

The results were later published in the peer-reviewed journal Microgravity Science and Technology. Contrary to what previous research might have suggested, the team found no significant changes in the microtubule and vimentin structures of the cartilage cells during the flight.

And the research continued.

In subsequent ESA-funded experiments, the team investigated whether altered gravity affects cellular calcium levels and membrane potential. Two further peer-reviewed studies followed in 2022, again finding that these cellular parameters remained largely unaffected by short periods of altered gravity. 🔬

BINDER is acknowledged for its support in both the 2020 and 2022 publications.

Today, researchers in Lucerne continue to investigate how altered gravity can help us better understand cartilage biology and explore new approaches to cartilage regeneration.

A good reminder that space research can generate insights with applications far beyond space. ☄️ 🛰️

🔗 Read the original BINDER case study: https://lnkd.in/ejS9mtBU

11/09/2026

𝗕𝗜𝗡𝗗𝗘𝗥 𝗮𝘁 𝗪𝗼𝗧𝗦 𝗶𝗻 𝗨𝘁𝗿𝗲𝗰𝗵𝘁 🔬

From September 22 to 25, 2026, we will be exhibiting at World of Industry, Technology & Science (WoTS) in the Netherlands.

For professionals working in Life Science and Laboratory Technology, this is a great opportunity to experience selected BINDER units firsthand and discuss specific applications with our team.

At our booth, we will be presenting:
• CO₂ incubators from the CB and CB-S series
• KB PRO plant growth chamber with CO₂ gassing

You can take a closer look at the units, try out their functions directly, and discuss your questions about laboratory applications and requirements with our team in person.

Our contacts for the Netherlands will also be there: Cor Koster and Fabienne Schmidtjansen look forward to meeting you and discussing your requirements.

📍 Jaarbeurs Utrecht, Netherlands
📅 September 22–25, 2026
📌 Hall 10 | Booth A025

Planning to visit WoTS? Stop by our booth and meet BINDER and our team in person.

08/09/2026

𝗚𝗼𝗼𝗱 𝗰𝗼𝗻𝘃𝗲𝗿𝘀𝗮𝘁𝗶𝗼𝗻𝘀 𝗼𝗳𝘁𝗲𝗻 𝘀𝘁𝗮𝗿𝘁 𝘄𝗶𝘁𝗵 𝗮 𝗰𝗼𝗳𝗳𝗲𝗲. ☕️

And that was definitely the case when the VWR, part of Avantor Central Europe Sales team stopped by at the BINDER headquarters in Tuttlingen.

During their visit to BINDER GmbH, we took the opportunity to talk about our future collaboration in Central Europe, discuss how we can further strengthen sales activities in the region, and exchange ideas on where we see additional potential together.

And since it’s always easier to talk about products when they’re right in front of you, Fabian Konrad gave the team a closer look at some of our latest products, features and developments.

For us, meetings like this are particularly valuable: getting away from emails and Teams calls, standing together in front of the actual products, asking questions, exchanging market feedback and developing ideas together.

Thanks to the VWR Central Europe team for the visit and the open conversations - and yes, we’ll make sure there’s coffee again next time. ☕️😉

Sylvia Stachelek | Simon Kuster | Nicole Hartl

Adresse

Im Mittleren Ösch 5
Tuttlingen
78532

Öffnungszeiten

Montag	08:00 - 17:00
Dienstag	08:00 - 17:00
Mittwoch	08:00 - 17:00
Donnerstag	08:00 - 17:00
Freitag	08:00 - 17:00

Telefon

+49746220050

Website

http://www.binder-world.com/

Benachrichtigungen

Erfahren Sie als Erste/r von Neuigkeiten und Aktionen: Wir schicken Ihnen eine E-Mail, wenn BINDER etwas veröffentlicht. Ihre E-Mail-Adresse wird für keinen anderen Zweck verwendet, und Sie können sich jederzeit abmelden.

Alles Anzeigen