Finke desert race 831

Finke desert race 831 Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Finke desert race 831, Sports Event, Brisbane.

Well the tow rig is getting some new wheels this week and just need to take 2.5mm out of the bore one down 3 to go
04/07/2020

Well the tow rig is getting some new wheels this week and just need to take 2.5mm out of the bore one down 3 to go

Well i had eye surgery alittle while ago and was stuck at home i did a little programing and cam up with a paddle shift ...
03/07/2020

Well i had eye surgery alittle while ago and was stuck at home i did a little programing and cam up with a paddle shift program for any eletronic auto So it will run standalone Or if u have a TCM u can have that changing the gears as normal.
then flick a switch and bam ur doing it with paddle shifter ( or two buttons if u like)

Well was not happy with the turbo once i fitted the csm/crank sencer . Added a 22.5 degree bit in to the top to tip it a...
22/05/2020

Well was not happy with the turbo once i fitted the csm/crank sencer . Added a 22.5 degree bit in to the top to tip it away from the head and rotated it about 10mm clockwise. Then had to lay it back 6mm to get it level for the oil drain . Oh well see if i find anything else that makes me mod the manifold

Well been playing in the shed at night this week as i feel like i did not do the truck justice by not working onit this ...
19/05/2020

Well been playing in the shed at night this week as i feel like i did not do the truck justice by not working onit this weekend and this is what happened .
Turbo manifold is made .I think i got it close enough to the head LOL

Well not alot done on the truck this weekend i decided that i need more bench space and also one i can use for building ...
18/05/2020

Well not alot done on the truck this weekend i decided that i need more bench space and also one i can use for building an auto on so i made a 2.5m bench out of some 25mm staino SHS legs x4 i had and then bolted them to the brick wall put 50x190 joist timber x4 bolted from underneath. Then glued the 2.5 mm top on which has a 50mm turn down on the front and 16mm turn back on that .also it has a 75mm turn up on the back .whole bench as about 5 degrees lean back so the oil will flow to the back and drain to the sides (u get alot of oil on the bench when striping autos) sat 2x205 droms full of water ontop while the glue si going off .
Also put a 600x2.5 shelf under it can never have enpugh shelf space

Very happy with it

Well been on the lathe this arvo for 3 hrs and BAM I have an adaptor from c4 converter to 2JZ crank .Drilled and tapped ...
09/05/2020

Well been on the lathe this arvo for 3 hrs and BAM I have an adaptor from c4 converter to 2JZ crank .
Drilled and tapped inside so i can get it out of the crank if i ever need to

Well thats another thing off the list one 3200 rpm v8 ford c4 converter redrilled and tapped to suit the 2JZNO S**T
04/05/2020

Well thats another thing off the list one 3200 rpm v8 ford c4 converter redrilled and tapped to suit the 2JZ
NO S**T

Well back at it again today got the mill going made the drop cut bandsaw into an upright bandsaw LOL and TIGS out as wel...
26/04/2020

Well back at it again today got the mill going made the drop cut bandsaw into an upright bandsaw LOL and TIGS out as well to make the exhaust manifold

Well its out of the shed (first time since late 2016)Old engine and box is out Full pressure wash in prep to start new e...
18/04/2020

Well its out of the shed (first time since late 2016)
Old engine and box is out
Full pressure wash in prep to start new engine fit up
SHHHHH 2JZ

Well i was stuck home for easter so what do i do hmmm i know im going to get on the mill and make an adaptor and port ma...
16/04/2020

Well i was stuck home for easter so what do i do hmmm i know im going to get on the mill and make an adaptor and port match it for the RB25 GREEDY intake to fit my new engine im building for the truck

Address

Brisbane, QLD

Website

Alerts

Be the first to know and let us send you an email when Finke desert race 831 posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category