24/02/2025
𝐏𝐚𝐬𝐚𝐥𝐚𝐦𝐚𝐭 𝐅𝐞𝐬𝐭𝐢𝐯𝐚𝐥 𝐃𝐫𝐚𝐠 𝐅𝐞𝐬𝐭 𝟐𝟎𝟐𝟓
𝐀𝐩𝐫𝐢𝐥 𝟏𝟏-𝟏𝟑, 𝟐𝟎𝟐𝟓
𝐋𝐚 𝐂𝐚𝐫𝐥𝐨𝐭𝐚 𝐂𝐢𝐭𝐲
🚦🚦🚦 CATEGORIES 🚦🚦🚦
🚦 Open Mix 🚦
✔Open engine modifications
✔Open gas
✔Open weight limit
🚦 52.4mm 🚦
✔52.4mm bore limit
✔Stock stroke
✔Stock valves size
✔110kgs weight limit
🚦 57mm 🚦
✔57mm bore limit
✔Stock stroke
✔Stock valves size
✔110kgs weight limit
🚦 Mio 59 Power 🚦
✔59mm bore limit
✔160cc limit
✔Open valves, 2 valves only
✔60% body cover
✔Stock chassis
✔110kgs weight limit
🚦 Mio I 59 Power 🚦
✔59mm bore limit
✔Stock stroke
✔Stock valves size
✔Stock ECU, remap allowed
✔60% body cover
✔Stock chassis
✔110kgs weight limit
🚦 RFI Allstock 🚦
✔Open Rim, Pipe, clutch springs, pinion & sprocket only
✔Aftermarket block is allowed as long as same length with the original; piston must be stock
✔The rest is stock
✔Lights must be functional
✔Stock handle bar or RS handle bar only (re-angle only, reposition NOT allowed)
✔All sensors must be functional
✔60% body cover
✔135kgs weight limit
🚦 RFI Allstock - ECU only 🚦
(Battle of ECU tuning)
✔Open Rim, Pipe, clutch springs, pinion & sprocket
✔Open ECU & open ignition coil
✔Aftermarket block is allowed as long as same length with the original; piston must be stock
✔The rest is stock
✔Lights must be functional
✔Open handle bar
✔Zero gasket NOT allowed
✔All sensors must be functional
✔60% body cover
✔135kgs weight limit
🚦 Raider FI 12K 🚦
✔Stock bore
✔Stock stroke
✔Stock valves
✔Stock cams
✔The rest open engine modifications
✔Open handle bar, open T-post, open gas tank
✔Headlight cowling with lens & side fairings must be present
✔Lightened chassis allowed
✔Subframe allowed
✔60% body cover
✔120kgs weight limit
🚦 RS150/GTR150/Sniper150 🚦
✔Stock cam with compression release, stock cam gear
✔Stock valves & stock valve spring
✔Stock piston & stock piston pin
✔Stock connecting rod & stock crankshaft with balancer
✔Stock drive gear & clutch gear ratio
✔Stock transmission ratio
✔Stock water pump
✔Functional starter
✔Modified clutch housing allowed
✔Lightened flywheel allowed
✔Open fuel lines (Open fuel pump, open injector & open TB)
✔Open ECU & open ignition coil
✔Zero gasket allowed
✔Cluster gauge and headlight must be functional
✔Hyperclutch is NOT allowed
✔Open handle bar
✔60% body cover
✔135kgs weight limit
🚦 Raider CPC 🚦
✔Carb, Pipe, CDI only/the rest is stock
✔1st gen unit is NOT allowed (No starter)
✔Aftermarket block is allowed as long as same length with the original; piston must be stock
✔Stock cams with compression release, stock cam gear
✔Stock valves, valve springs & retainers (aftermarket NOT allowed)
✔Stock bore & stroke
✔Stock connecting rod & crank pin
✔Stock crankshaft(stock balancer)
✔Stock transmission
✔Stock drive gear
✔Stock pulser position
✔Stock flywheel with starter & starter gear
✔Stock handle bar or RS handle bar only (re-angle only, reposition NOT allowed)
✔Open clutch linings, racing clutch springs allowed
✔Complete gaskets (head & block), must be original SGP gaskets
✔Open manifold
✔Open ignition coil
✔Mixed engine parts allowed
✔Battery drive not allowed, charging system must be functional
✔Stock harness, stator must be functional
✔Crank pin bearing must be original
✔Open sprocket ratio
✔60% body cover
✔135kgs weight limit
🚦 Raider PCC 🚦
✔Port, Carb, CDI
✔Stock bore - 62mm
✔Stock stroke - 48.8mm
✔Piston must be original 25g (valve pocket allowed, no lightened, no regrove piston ring, no tabas)
✔Retainer must be OEM (no tabas)
✔Engine valve (22mm 19mm) no lightened valve allowed
✔Stock head (resurfacing is not allowed, 98.000 mm minimum. 97.99 or less is DQ)
✔Zero gasket allowed
✔Intake manifold OEM 25g (porting allowed)
✔Adjustable cam gear allowed
✔Camshaft must be original duration (Intake: 6.9- 6.8 28.05 up base circle - Ex: 6.7-6.5 27.55 up base circle)
✔NO lightened camshaft, w/ or w/o comp release
✔OEM raider crankshaft w/ balancer and OEM connecting rod
✔NO lightened crankshaft pin, NO lightened crankshaft gear. All parts of the crankshaft must be stock.
✔Displacement: 147.33
✔Must be OEM R150 magneto (magneto 100% functional), No dry magneto
✔Open Stator (meron o wala nakakabit)
✔Open transmission(must be for 6 speed r150)
✔Clutch housing must be OEM (no lightened, no aftermarket)
✔Kick starter (meron o wala nakakabit)
✔Oil cooler must be functional
✔Aftermarket block is allowed as long as same length with the original
✔Open carb(any size)
✔Open CDI
✔Open ignition coil
✔Open valve spring
✔Open clutch spring
✔Open clutch lining and open pressure plate
✔Open bearing (engine & Transmission)
✔Battery operated allowed
✔Open handle bar
✔Alloy frame, sub frame, T-post, swing arm, gas tank allowed
✔Brakeless hub(rear) allowed
✔120kgs weight limit
🚦 Raider 25G 🚦
✔Stock bore
✔Stock stroke
✔Stock valves
✔Stock cams
✔120kgs weight limit
🚦 Pushrod Open 🚦
✔Open engine modification
✔Open chassis
✔120kgs weight limit
🚦 PCT China 150 🚦
✔Stock bore - 62mm
✔Stock stroke - 49.5mm
✔Stock valves size - 25mm/30mm
✔Open chassis
✔120kgs weight limit
🚦 Pushrod 125 - Carb, Pipe, CDI 🚦
✔All engine parts must be stock
✔Open carb
✔Open CDI
✔Open pipe
✔Open clutch spring & clutch lining
✔Open ignition coil
✔Fuel tank must be functional
✔Headlight must be present
✔Stock look
✔Complete gaskets
✔No machine works, no lighten, no reface, no porting allowed
✔Stock bore - 56.5mm
✔Stock stroke - 49.5mm
✔Stock valves size - 24mm/29mm
✔Cam gear slot must be stock - bawal may gasgas o anu man nga madudahan nag re timing sang cam
✔Cam pin must be stock - bawal ang may buhin
✔Cam gear position must be stock - naka sentro dapat sa kunya ang timing mark
✔Push plug must be stock - bawal tabas spring or kuhaon ang spring
✔Crank pin must be stock, no lighten
✔Crankshaft bearing must be intact (indi pwedi halog)
✔Stock pulser position
✔Clutch house must be stock - kon kaagi ilis ang damper pero nagmag-an, bukaron para layo sa duda nga gin lighten
✔Camshaft must be MRP Brand
✔125kgs weight limit
🚦 Pushrod 125 - Jet Pipe 🚦
✔Allowed: Open jettings, Open pipe, Open clutch spring & clutch lining, Camshaft must be MRP Brand
✔THE REST MUST BE STOCK
✔Stock carb, Stock ignition coil, Stock CDI
✔Stock bore - 56.5mm
✔Stock stroke - 49.5mm
✔Stock valves size - 24mm/29mm
✔Fuel tank must be functional
✔Headlight must be functional
✔Stock wiring/harness
✔Stock look
✔Complete gaskets
✔No machine works, no lighten, no reface, no porting allowed
✔Cam gear slot must be stock - bawal may gasgas o anu man nga madudahan nag re timing sang cam
✔Cam pin must be stock - bawal ang may buhin
✔Cam gear position must be stock - naka sentro dapat sa kunya ang timing mark
✔Push plug must be stock - bawal tabas spring or kuhaon ang spring
✔Crank pin must be stock, no lighten
✔Crankshaft bearing must be intact (indi pwedi halog)
✔Stock pulser position
✔Clutch house must be stock - kon kaagi ilis ang damper pero nagmag-an, bukaron para layo sa duda nga gin lighten
✔Bawal ang pin 13 kung indi Motoposh ang unit
✔125kgs weight limit
🚦 Nmax/Aerox CVT 🚦
✔Open CVT (pulley set, clutch bell, clutch lining, clutch springs, torque drive, belt, center spring)
✔Aftermarket pipe allowed
✔The rest must be stock
✔Stock chassis
✔Stock tire size(13 for Nmax, 14 for Aerox)
✔Stock harness
✔Front & rear brakes must be functional
✔All lights must be functional
✔100% body cover
✔180kg weight limit
🚦 Nmax/Aerox Bolt-on 🚦
✔All stock: Block, Head, Crankshaft, Valves, Rod, Bearings, Manifold, Injector, Throttle body, Airbox with OEM rubber, Oil pump, Fuel pump, Battery, Radiator
✔Allowed: Cam gear, Open camshaft, Open CVT, Open gears, Power pipe, Stock ECU, remap allowed, R15 piston kit
✔NOT allowed: No compression release, Th*****ng & Polishing on engine parts
✔Stock chassis
✔Stock tire size(13 for Nmax, 14 for Aerox)
✔Stock harness
✔Front & rear brakes must be functional
✔All lights must be functional
✔100% body cover
✔180kg weight limit
🚦 Nmax/Aerox 232 🚦
✔NGO Rules
♻️ Round Robin ♻️
🏁 Racetrack length: 201 meters 🏁
⛽️ Bring your own gasoline ⛽️
⛽️ Pump Gas Only ⛽️
